| About |
|---|
| 注塑，具有高的流动性，良好的尺寸稳定性和良好的加工性能，机械性能优良，抗冲强度高，耐高温，自然老化时间长，无毒无臭 |
| Product Description | |
|---|---|
| Generic | PP not specified |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good Dimensional Stability,High liquidity |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.91 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | 8-15 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 31 | MPa | ASTM D-638 |
| Rockwell hardness | 100 | R 级 | ASTM D785 |
| Bending modulus | 1400 | MPa | ASTM D790 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | 110 | ℃ | ASTM D648 |
| Vicat Softening Temp | 150 | ℃ | ASTM D1525 |
| Other performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Isometric index | 96 | % | MPC PP-F-107 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |