| About |
|---|
| Product Description | |
|---|---|
| Supplier | Fushun |
| Generic | Linear low density polyethylene |
| Material Status | Commercial: Active |
| Features | Puncture Resistant |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Particle appearance | |||
| Polluting particles | ≤10 | 个/kg | |
| Large and small particles | ≤10 | g/kg | |
| Snake Skin and Silk Hair | ≤20 | 个/kg | |
| fisheye | |||
| 0.8mm | ≤2 | 个/1520cm | |
| 0.4mm | ≤15 | 个/1520cm | |
| Density | 0.923 | g/cm³ | |
| Melt Flow Rate | 2.0 | g/10min | |
| Haze | ≤14 | % | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ≥12 | MPa | |
| Tensile strain | ≥500 | % | |
| tensile strength | |||
| yield | ≥8 | MPa | |
| Impact strength of falling darts | ≥60 | g |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |