| About |
|---|
| Product Description | |
|---|---|
| Supplier | Maoming |
| Generic | LDPE |
| Material Status | Commercial: Active |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.923 | g/cm³ | ISO 1183 |
| Melt Flow Rate | 1.9 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| TD | 18 | MPa | ISO 527 |
| MD | 26 | MPa | ISO 527 |
| Tensile strain | |||
| TD | 600 | % | ISO 527 |
| MD | 250 | % | ISO 527 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 20° | ＞80 | DIN 67350 | |
| Transmittance | ＜6 | % | ASTM D1003 |
| Other performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Film thickness | |||
| Typical blown film performance | 50 | μm | |
| Impact strength of falling darts | 110 | g | ASTM D-1709 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |