| About |
|---|
| 中国石化高密度聚乙烯中空料密度较大，模量高，刚性、韧性好，耐环境应力开裂性能良好，加工性能优异，适用于中空吹塑中型或大型装运液体的容器。 |
| Product Description | |
|---|---|
| Supplier | Maoming |
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | Excellent Processability,High density,Rigid-tough balance,High ESCR,High modulus |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.955 | g/cm³ | |
| ash content | ≤0.1 | % | |
| Melt Flow Rate | 0.35 | g/10min | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ≥26 | MPa | |
| Tensile strain | ≥500 | % |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | ≥16 | kJ/m² |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | ≤-75 | ℃ |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |