| About |
|---|
| 具有良好的耐热、耐寒性、较高的刚性和良好的抗应力开裂性能，产品符合食用包装卫生标准 |
| Product Description | |
|---|---|
| Supplier | Maoming |
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | Hydrolysis stability,High Heat Resistance,Durability,Heat Resistance, Good,Cold heat resistance |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.995 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃ | 0.35 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 27 | MPa | ASTM D638 |
| Bending modulus | 1370 | MPa | ASTM D790 |
| Tensile strain | >600 | % | ASTM D638 |
| ESCR(Environmental Stress Cracking Resistance) | |||
| F50 | 45 | hr | ASTM D1693 |
| F50 | 35 | hr | ASTM D1693 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | <-75 | ℃ | ASDM D746 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |