| About |
|---|
| Product Description | |
|---|---|
| Supplier | Audia |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Elastic,High scratch resistance |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.9 | g/cm³ | ASTM D792 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile Strength | |||
| Broken BBrk | 7.5 | MPa | ASTM D412 |
| 100% | 3.0 | MPa | ASTM D412 |
| 300% | 4.4 | MPa | ASTM D412 |
| Elongation at Break | 500 | % | ASTM D412 |
| Shore hardness | 87 | Shore A | ASTM D2240 |
| Process Conditions | |||
|---|---|---|---|
| Injection Molding | Nominal value | Unit | Test method |
| Rear Temperature Zone 1 | 180-210 | ℃ | |
| Middle Temperature Zone 2 | 190-220 | ℃ | |
| Front Temperature Zone 3 | 200-230 | ℃ | |
| Nozzle temperature | 200-230 | ℃ | |
| Melt Temperature | 250 | ℃ | |
| Mold Temperature | 20-60 | ℃ | |
| Injection pressure | 60%-80%最大压力 | ||
| Injection speed | 60%-80%最大速度 | ||
| Hold Pressure | 40%-60%最大压力 | ||
| Screw Speed | 40-80 | rpm | |
| Back Pressure | 10%-30%最大压力 | ||
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |