| About |
|---|
| Product Description | |
|---|---|
| Supplier | Audia |
| Material Status | Commercial: Active |
| Features | processability,Elastic,High scratch resistance |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.3 | g/cm³ | ASTM D792 |
| Shrinkage rate | 1.0-1.5 | % | Reference Value |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile Strength | |||
| Broken BRK | 6 | MPa | ASTM D412 |
| 100% | 1.3 | MPa | ASTM D412 |
| 300% | 2.8 | MPa | ASTM D412 |
| Tensile Elongation | 540 | % | ASTM D412 |
| 77 | 邵氏 A | ASTM D2240 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame Rating | |||
| 1.5 mm | HB | UL 94 |
| Process Conditions | |||
|---|---|---|---|
| Injection molding | Nominal value | Unit | Test method |
| Drying Temperature | 80-90 | ℃ | |
| Drying Time | 3-4 | hr | |
| Barrel, Rear | 180-200 | ℃ | |
| Barrel, Middle | 190-210 | ℃ | |
| Barrel, Front | 200-220 | ℃ | |
| Nozzle temperature | 200-220 | ℃ | |
| Maximum Melt Temperature | 230 | ℃ | |
| Mold Temperature | 10-60 | ℃ | |
| Injection Pressure | 60-80%Max.Pressure | ||
| Injection Speed | 60-80%Max.Speed | ||
| Hold Pressure | 40-60%Max.Pressure | ||
| Screw Speed | 40-80 | rpm | |
| Back Pressure | 10-30%Max Pressure | ||
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |