| About |
|---|
| Product Description | |
|---|---|
| Generic | ABS |
| Material Status | Commercial: Active |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Tensile yield strength | |||
| 1/8″,5mm/min | 42 | MPa | ASTM D-638 |
| Tensile fracture strength | |||
| 1/8″,5mm/min | 32 | MPa | ASTM D-638 |
| Tensile yield elongation | |||
| 1/8″,5mm/min | 3 | % | ASTM D-638 |
| Tensile strain at break | |||
| 1/8″,5mm/min | 33 | % | ASTM D-638 |
| IZOD Notch Impact Strength 73 ° F (23 ℃) | |||
| 1/8″,23℃ | 29 | KJ/m² | ASTM D-256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat softening point (120 ℃/10hr) | |||
| 1/8″,50℃/hr | 105 | ℃ | ASTM D-1525 |
| Basic performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Melt flow rate (230 ℃/3.8kg) | |||
| 200℃,3.8kg | 7.8 | g/10min | ASTM D-1238 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |