| About |
|---|
| DI-PAK E-4600 SERIES Flexible, high strength, 50 to 71 shore D hardness potting and encapsulating systems. Available in flame retardant (FR), 3 minute (-3) gel time, and in black or unpigmented.&& |
| Product Description | |
|---|---|
| Generic | 氟橡胶 |
| Material Status | Commercial: Active |
| Features | Good flexibility,Low Viscosity,noise reduction,Insulation,Fast Cure |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.80 | g/cm³ | Internal Method |
| Mooney viscosity | |||
| ML 1+10，100℃ | 4 | MU | Internal Method |
| Fluorine content | 66 | % | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | ASTM D2240 | ||
| Shaw’s A | 67 | ASTM D2240 | |
| Shaw’s A | 70 | ASTM D2240 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ASTM D412 | ||
| 100% strain | 4.10 | MPa | ASTM D412 |
| 100% strain | 4.80 | MPa | ASTM D412 |
| tensile strength | ASTM D412 | ||
| — | 14.4 | MPa | ASTM D412 |
| — | 17.7 | MPa | ASTM D412 |
| Tensile strain | ASTM D412 | ||
| fracture | 250 | % | ASTM D412 |
| fracture | 220 | % | ASTM D412 |
| Compression deformation | ASTM D395B | ||
| 200℃，22 hr | 36 | % | ASTM D395B |
| 200℃，70 hr | 46 | % | ASTM D395B |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass transition temperature | -20.0 | ℃ |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |