3M™ Dyneon™ Fluoroelastomer FE 5610N

About
3M™ Dyneon™ Fluoroelastomer FE 5610N is a dipolymer made from hexafluoropropylene and vinylidene fluoride. FE5610N has an incorporated bisphenol cure system. Special Features Composition: dipolymer of vinylidene fluoride and hexafluoropropylene Process targets: injection and transfer moulding Proprietary incorporated cure technology Viscosity modifier Superior flow over regular Dyneon Fluoroelastomer injection moulding grades Improved scorch resistance compared to products marketed as Dyneon Fluoroelastomer with a product class “FC” Excellent mould release Clean running Typical Applications 3M™ Dyneon™ Fluoroelastomer FE 5610N is suitable to produce O-rings in an injection moulding process.&&

About

3M™ Dyneon™ Fluoroelastomer FE 5610N is a dipolymer made from hexafluoropropylene and vinylidene fluoride. FE5610N has an incorporated bisphenol cure system. Special Features Composition: dipolymer of vinylidene fluoride and hexafluoropropylene Process targets: injection and transfer moulding Proprietary incorporated cure technology Viscosity modifier Superior flow over regular Dyneon Fluoroelastomer injection moulding grades Improved scorch resistance compared to products marketed as Dyneon Fluoroelastomer with a product class “FC” Excellent mould release Clean running Typical Applications 3M™ Dyneon™ Fluoroelastomer FE 5610N is suitable to produce O-rings in an injection moulding process.&&

Product Description
Generic	氟橡胶
Material Status	Commercial: Active
Features	Good stripping performance
Availabilitys	North America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.80	g/cm³	Internal Method
Mooney viscosity
ML 1+10，121℃	17	MU	Internal Method
Fluorine content	66	%	Internal Method

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	76		ASTM D2240

elastic body	Nominal value	Unit	Test method
tensile strength	14.0	MPa	ASTM D412A
100% strain	5.30	MPa	ASTM D412A
Tensile strain
fracture	220	%	ASTM D412A
Compression deformation			ASTM D1414
200℃，70 hr	23	%	ASTM D1414
200℃，70 hr	15	%	ASTM D1414

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.