3M™ Dyneon™ Fluoroelastomer FPO 3731

About
Dyneon Fluoroelastomer FPO 3731 is a high fluorine content peroxide curable extrusion grade, which has been developed for hose applications. The grade provides excellent physical properties and is extremely resistant against fuels and different biodiesel grades (RME or SME). Special Features Composition: terpolymer of vinylidene fluoride, hexafluoropropylene and tetrafluoroethylene plus cure site monomer Process target: extrusion Excellent flow Excellent scorch safety Excellent physical properties Outstanding resistance against biodiesel Typical Applications Dyneon Fluoroelastomer FPO 3731 can be used for manufacturing parts such as fuel line hoses, filler neck hoses, or fuel injector O-rings, among others.&&

About

Dyneon Fluoroelastomer FPO 3731 is a high fluorine content peroxide curable extrusion grade, which has been developed for hose applications. The grade provides excellent physical properties and is extremely resistant against fuels and different biodiesel grades (RME or SME). Special Features Composition: terpolymer of vinylidene fluoride, hexafluoropropylene and tetrafluoroethylene plus cure site monomer Process target: extrusion Excellent flow Excellent scorch safety Excellent physical properties Outstanding resistance against biodiesel Typical Applications Dyneon Fluoroelastomer FPO 3731 can be used for manufacturing parts such as fuel line hoses, filler neck hoses, or fuel injector O-rings, among others.&&

Product Description
Generic	氟橡胶
Material Status	Commercial: Active
Features	High liquidity,Terpolymer,Fuel resistance
Availabilitys	North America,Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.89	g/cm³	Internal Method
Mooney viscosity
ML 1+10，121℃	35	MU	Internal Method
Fluorine content	70	%	Internal Method

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	72		ASTM D2240

elastic body	Nominal value	Unit	Test method
tensile strength	20.9	MPa	DIN 53504
100% strain	7.30	MPa	DIN 53504
Tensile strain
fracture	190	%	DIN 53504
Compression deformation
150℃，22 hr	65	%	ASTM D395
200℃，70 hr	35	%	ASTM D395B

THERMAL	Nominal value	Unit	Test method
Glass transition temperature	-9.00	℃

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.