| About |
|---|
| Features Composition: terpolymer of vinyli-dene fluoride, hexafluoro propylene and tetrafluoroethylene Process targets: transfer and compression molding, bonding and calendering Improved scorch resistance at high molding temperatures Proprietary incorporated cure technology Excellent mold release – can be used in automated injection molding equipment Improved cure technology resulting in more consistent part size from successive molding cycles Clean running&& |
| Product Description | |
|---|---|
| Generic | 氟橡胶 |
| Material Status | Commercial: Active |
| Features | Good stripping performance |
| Availabilitys | North America,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.86 | g/cm³ | Internal Method |
| Mooney viscosity | |||
| ML 1+10，121℃ | 80 | MU | Internal Method |
| Fluorine content | 69 | % | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 71 | ASTM D2240 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 14.4 | MPa | Internal Method |
| 100% strain | 3.60 | MPa | Internal Method |
| Tensile strain | |||
| fracture | 290 | % | Internal Method |
| Compression deformation | |||
| 200℃，70 hr | 38 | % | ASTM D395B |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |