3M™ Dyneon™ Fluoroplastic E-15188H

About
Dyneon Fluoroplastic E-15188H is a fluorothermoplastic containing tetrafluoroethylene, hexafluoropropylene and vinylidene fluoride. This terpolymer provides a combination of performance advantages unmatched by any other melt processable fluorothermoplastic, offering new opportunities to make multi-layer hoses, tubing, film, sheet, seals and containers. Special Features Excellent flexibility Excellent chemical resistance Excellent permeation resistance to fuels Bondable to itself and other substrates (for multi-layer constructions) Processing profile allows co-processing with olefinic plastics and hydrocarbon elastomers Low flammability High transparency Low refractive index&&

About

Dyneon Fluoroplastic E-15188H is a fluorothermoplastic containing tetrafluoroethylene, hexafluoropropylene and vinylidene fluoride. This terpolymer provides a combination of performance advantages unmatched by any other melt processable fluorothermoplastic, offering new opportunities to make multi-layer hoses, tubing, film, sheet, seals and containers. Special Features Excellent flexibility Excellent chemical resistance Excellent permeation resistance to fuels Bondable to itself and other substrates (for multi-layer constructions) Processing profile allows co-processing with olefinic plastics and hydrocarbon elastomers Low flammability High transparency Low refractive index&&

Product Description
Generic	含氟聚合物
Material Status	Commercial: Active
Features	Weather resistance is good,Good Clarity,Good flexibility,Solvent resistance,Terpolymer,Agglomerability,Fuel resistance
Availabilitys	North America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	2.00	g/cm³	ISO 12086
Melt Flow Rate	5.0	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
tensile strength
fracture	24.0	MPa	ISO 527-2
Tensile strain
fracture	450	%	ISO 527-2

THERMAL	Nominal value	Unit	Test method
Glass transition temperature	26.0	℃	ASTM D4591
Melting temperature	165	℃	ISO 12086

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Extreme oxygen index	> 75	%	ASTM D2863

optical performance	Nominal value	Unit	Test method
Refractive index	1.360		ASTM D542
Transmittance
100 µm，300 nm	85.0	%
100 µm，600 nm	93.0	%

Process Conditions
injection	Nominal value	Unit	Test method
Extrusion	Nominal value	Unit	Test method
Nozzle temperature	260 to 280	°C
Mold temperature	50 to 100	°C
Barrel temperature	30 to 70	°C
Barrel 1 zone temperature	180	°C
Barrel 2 zone temperature	220	°C
Barrel 3 zone temperature	260	°C
Nozzle temperature	270	°C

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.