3M™ Dyneon™ Fluoroplastic ET 6218Z

About
3M™ Dyneon™ Fluoroplastic ET 6218Z is a partially fluorinated copolymer comprising tetrafluoroethylene and ethylene and is belonging to the product class ETFE. It was designed primarily for the extrusion of monofilaments. Special Features Extremely high weathering and UV stability Wide service temperature range (-200 to +150°C) Very good non-stick characteristics Good resistance to high energy radiation Low flammability Excellent mechanical properties Very good resistance to solvents and chemicals&&

About

3M™ Dyneon™ Fluoroplastic ET 6218Z is a partially fluorinated copolymer comprising tetrafluoroethylene and ethylene and is belonging to the product class ETFE. It was designed primarily for the extrusion of monofilaments. Special Features Extremely high weathering and UV stability Wide service temperature range (-200 to +150°C) Very good non-stick characteristics Good resistance to high energy radiation Low flammability Excellent mechanical properties Very good resistance to solvents and chemicals&&

Product Description
Generic	ETFE
Material Status	Commercial: Active
Features	Weather resistance is good,No viscosity,Excellent Processability,High liquidity,Gamma radiation,Copolymer,Solvent resistance
Availabilitys	North America,Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.72	g/cm³	ISO 12086
Melt Flow Rate
297℃，5.0kg	18	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	1100	MPa	ISO 527-2
tensile strength
Fracture, 23 ℃	40.0	MPa	ISO 527-2
Tensile strain
Fracture, 23 ℃	400	%	ISO 527-2

THERMAL	Nominal value	Unit	Test method
Melting temperature	266	℃	ISO 12086

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Extreme oxygen index	35	%	ASTM D2863

Process Conditions
injection	Nominal value	Unit	Test method
Barrel rear temperature	270	°C
Barrel middle temperature	300	°C
Barrel front temperature	330	°C
Nozzle temperature	330	°C
Mold temperature	150	°C
Injection pressure	40.0	MPa
Hold pressure	30.0	MPa
Screw speed	80	rpm

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.