| About |
|---|
| 3M™ Dyneon™ Fluoroplastic FEP 6338Z is a fully fluorinated copolymer comprising tetrafluoroethylene and hexafluoropropylene and is belonging to the product class FEP. It was designed for ultra high speed extrusion for wire insulation and features greatly enhanced flex life properties. Special Features Ultra high extrusion speed Enhanced flex life Excellent dielectric properties Wide processing window Complies with VDE 0207 Extremely low flammability (high LOI) High thermal stability Low coefficient of friction Very high weathering and UV stability&& |
| Product Description | |
|---|---|
| Generic | FEP |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,High liquidity,Low coefficient of friction,Copolymer,Heat Stabilized,High ESCR |
| Availabilitys | North America,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 2.15 | g/cm³ | ISO 12086 |
| Melt Flow Rate | |||
| 372℃，5.0kg | 38 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 680 | MPa | ISO 527-2 |
| tensile strength | |||
| Fracture, 23 ℃ | 20.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| Fracture, 23 ℃ | 300 | % | ISO 527-2 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | > 250 | ℃ | ISO 12086 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Dielectric strength | |||
| 0.25 mm | 70 | kV/mm | ASTM D149 |
| Dielectric constant | ASTM D150 | ||
| 23 ℃，1 MHz | 2.05 | ASTM D150 | |
| 23 ℃，9.40 GHz | 2.04 | ASTM D150 | |
| Dissipation factor | ASTM D150 | ||
| 1 MHz | 5.0E-4 | ASTM D150 | |
| 9.4 GHz | 3.0E-4 | ASTM D150 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Extreme oxygen index | > 95 | % | ASTM D2863 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| MIT flexural strength (double folds, 200.0 µ m) | 23000 | ASTM D2176 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Barrel 1 zone temperature | 285 | °C | |
| Barrel 2 zone temperature | 305 | °C | |
| Barrel 3 zone temperature | 320 | °C | |
| Barrel 4 zone temperature | 330 | °C | |
| Nozzle temperature | 340 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |