3M™ Dyneon™ Fluoroplastic PFA 6503PBZ

About
3M™ Dyneon™ Fluoroplastic Powder PFA 6503PBZ is a fluorothermoplastic powder with excellent thermal stability characteristics, designed for use in thin film powder coatings. Typical applications include non-stick surfaces, chemical vessel and tank liners, electrical insulation and low friction applications. Features and Benefits Excellent thermal stability Excellent electrostatics Excellent non-stick performance Outstanding flow and fluidization Excellent stress crack resistance Smooth surfaces Process targets: powder coating Non-wetting Heat resistant to 260°C (500°F) Low friction Good transparency Chemical resistant&&

About

3M™ Dyneon™ Fluoroplastic Powder PFA 6503PBZ is a fluorothermoplastic powder with excellent thermal stability characteristics, designed for use in thin film powder coatings. Typical applications include non-stick surfaces, chemical vessel and tank liners, electrical insulation and low friction applications. Features and Benefits Excellent thermal stability Excellent electrostatics Excellent non-stick performance Outstanding flow and fluidization Excellent stress crack resistance Smooth surfaces Process targets: powder coating Non-wetting Heat resistant to 260°C (500°F) Low friction Good transparency Chemical resistant&&

Product Description
Generic	PFA
Material Status	Commercial: Active
Features	No viscosity,Good Clarity,High liquidity,Low coefficient of friction,Food contact compliance,Solvent resistance,Heat Stabilized,High ESCR
Availabilitys	North America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	2.15	g/cm³	ASTM D792
Apparent density	0.80	g/cm³	DIN 53466
Melt Flow Rate
372℃，5.0kg	3.0	g/10min	ASTM D1238

THERMAL	Nominal value	Unit	Test method
Melting temperature	308	℃	ASTM D4591

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Extreme oxygen index	> 95	%	ASTM D2863

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	60		ASTM D2240
tensile strength
23℃	30.0	MPa	ASTM D638
Tensile strain
Fracture, 23 ℃	380	%	ASTM D638
Bending modulus	550	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.