3M™ Dyneon™ Fluoroplastic PFA 6505TZ

About
3M™ Dyneon™ Fluoroplastic Granules PFA 6505TZ (a fully fluorinated copolymer of tetrafluoroethylene and perfluorovinylether) has exceptional temperature resistance, excellent electrical properties and excellent chemical inertness and weather resistance. It is used in molded valves, pumps, tanks, filters, pipes, and in wire and cable applications. Features and Benefits Wide service temperature range Excellent, almost universal resistance to solvents and chemicals High transparency Extremely high weathering resistance and UV stability Smooth surfaces Broad processing window High limiting oxygen index: does not support combustion Good non-stick characteristics Excellent electrical insulation properties Excellent mold release Good low friction properties Excellent stress crack resistance&&

About

3M™ Dyneon™ Fluoroplastic Granules PFA 6505TZ (a fully fluorinated copolymer of tetrafluoroethylene and perfluorovinylether) has exceptional temperature resistance, excellent electrical properties and excellent chemical inertness and weather resistance. It is used in molded valves, pumps, tanks, filters, pipes, and in wire and cable applications. Features and Benefits Wide service temperature range Excellent, almost universal resistance to solvents and chemicals High transparency Extremely high weathering resistance and UV stability Smooth surfaces Broad processing window High limiting oxygen index: does not support combustion Good non-stick characteristics Excellent electrical insulation properties Excellent mold release Good low friction properties Excellent stress crack resistance&&

Product Description
Generic	PFA
Material Status	Commercial: Active
Features	Weather resistance is good,No viscosity,Excellent Processability,Good Clarity,High Viscosity,Low coefficient of friction,Good stripping performance,Copolymer,Solvent resistance,Insulation
Availabilitys	North America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	2.15	g/cm³	ISO 12086
Melt Flow Rate
372℃，5.0kg	5.0	g/10min	ISO 1133

THERMAL	Nominal value	Unit	Test method
Melting temperature	308	℃	ISO 12086

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Extreme oxygen index	> 95	%	ASTM D2863

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	60		ASTM D2240 , ISO 868
tensile strength
Fracture, 23 ℃	34.0	MPa	ASTM D638
Tensile strain
Fracture, 23 ℃	390	%	ISO 527-2
Bending modulus	550	MPa	ISO 178

Process Conditions
injection	Nominal value	Unit	Test method
Extrusion	Nominal value	Unit	Test method
Processing (melt) temperature	< 250	°C
Melt temperature	360 to 390	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.