| About |
|---|
| 3M™ Dyneon™ Fluoroplastic PFA 6510GV15WZ is an off-white fluorothermoplastic compound consisting of a fully fluorinated copolymer of tetrafluoroethylene and perfluorovinylether and glass fibers. Special Features Wide service temperature range Extremely high weathering resistance and UV stability High limiting oxygen index: Does not support combustion Good low-friction properties Extremely high wear resistance Good resistance to solvents and chemicals Good electrical properties Good non-stick characteristics Good form stability&& |
| Product Description | |
|---|---|
| Generic | PFA |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,No viscosity,Good Electrical Properties,Low coefficient of friction,Copolymer,Good wear resistance,Solvent resistance |
| Availabilitys | North America,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 2.20 | g/cm³ | ISO 12086 |
| Melt Flow Rate | |||
| 372℃，5.0kg | 10 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| Fracture, 23 ℃ | 17.0 | MPa | ASTM D638 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 308 | ℃ | ISO 12086 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Processing (melt) temperature | 360 to 390 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |