3M™ Dyneon™ Fluoroplastic PFA FLEX8502UHPZ

About
3M™ Dyneon™ PFA FLEXUHPZ series exhibits improved environmental stress crack resistance (ESCR) to stress cracking agents such as fluorosurfactants and fluorosurfactant-containing chemicals. In addition, this series offers very low levels of extractable ions, making it ideal for critical semiconductor wet chemical processes. 3M offers two grades in its PFA FLEX product line: PFA FLEX8502UHPZ for tubing applications and PFA FLEX8515UHPZ for injection molding applications. Features and Benefits Improved clarity Extremely low levels of extractable ions Smoother surfaces Flame resistance Temperature capability up to 240°C Excellent chemical resistance Significantly longer life in fluorosurfactant containing fluids&&

About

3M™ Dyneon™ PFA FLEXUHPZ series exhibits improved environmental stress crack resistance (ESCR) to stress cracking agents such as fluorosurfactants and fluorosurfactant-containing chemicals. In addition, this series offers very low levels of extractable ions, making it ideal for critical semiconductor wet chemical processes. 3M offers two grades in its PFA FLEX product line: PFA FLEX8502UHPZ for tubing applications and PFA FLEX8515UHPZ for injection molding applications. Features and Benefits Improved clarity Extremely low levels of extractable ions Smoother surfaces Flame resistance Temperature capability up to 240°C Excellent chemical resistance Significantly longer life in fluorosurfactant containing fluids&&

Product Description
Generic	PFA
Material Status	Commercial: Active
Features	Low extract,High purity,High Viscosity,Low (to None) Ion Content,High ESCR
Availabilitys	North America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	2.15	g/cm³	ISO 12086
Melt Flow Rate
372℃，5.0kg	2.0	g/10min	ISO 1133

THERMAL	Nominal value	Unit	Test method
Melting temperature	290	℃	ISO 12086

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Extreme oxygen index	> 95	%	ASTM D2863

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	60		ASTM D2240 , ISO 868
tensile strength
Fracture, 23 ℃	35.0	MPa	ASTM D638
Tensile strain
Fracture, 23 ℃	330	%	ISO 527-2
Bending modulus	600	MPa	ISO 178

Process Conditions
injection	Nominal value	Unit	Test method
Extrusion	Nominal value	Unit	Test method
Processing (melt) temperature	340 to 370	°C
Melt temperature	340 to 370	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.