3M™ Dyneon™ Fluoroplastic PVDF 2066/0002

About
3M™ Dyneon™ PVDF 2066/0002, a fluoropolymer material, provides an excellent balance of physical properties, processability, surface smoothness, flexibility, and refractive index, allowing for a wide array of gauges for filaments such as fishing line. In addition to the well-established intrinsic characteristics of PVDF such as high strength for a given filament diameter and a refractive index nearly identical to water, PVDF 2066/0002 has improved impact resistance that can provide additional shock strength to filaments. Features and Benefits Highest impact strength of any extrudable 3M PVDF Highest melt viscosity of any extrudable 3M PVDF High tensile strength&&

About

3M™ Dyneon™ PVDF 2066/0002, a fluoropolymer material, provides an excellent balance of physical properties, processability, surface smoothness, flexibility, and refractive index, allowing for a wide array of gauges for filaments such as fishing line. In addition to the well-established intrinsic characteristics of PVDF such as high strength for a given filament diameter and a refractive index nearly identical to water, PVDF 2066/0002 has improved impact resistance that can provide additional shock strength to filaments. Features and Benefits Highest impact strength of any extrudable 3M PVDF Highest melt viscosity of any extrudable 3M PVDF High tensile strength&&

Product Description
Generic	PVDF
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,Good flexibility,High impact resistance,High Viscosity,Good Tensile Strength
Availabilitys	North America,Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Melt Flow Rate
230℃，10.0kg	4.0 to 6.0	g/10min	ASTM D1238
Volatiles
5 min/110℃，Thermobalance	< 0.20	%

MECHANICAL	Nominal value	Unit	Test method
tensile strength
Yield, 23 ℃	46.0	MPa
Fracture, 23 ℃	67.0	MPa
Tensile strain
Yield, 23 ℃	9.0	%
Fracture, 23 ℃	430	%
Bending modulus
23℃	1670	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
2. 2.0 in/min
3. 0.079 in/min
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.