3M™ Dyneon™ Perfluoroelastomer PFE 7502BZ

About
The new Dyneon Perfluoroelastomer compound PFE 7502BZ provides an unusual combination of very broad chemical resistance and excellent physical properties at continuous high service temperatures up to 275°C. It is ideally suited for applications in the chemical processing industry as it provides long-term reliable sealing in the most extreme environments. PFE 7502BZ is compliant to the relevant FDA standards. Please contact us for more details. Special Features 75 Shore A black compound Proprietary gum / cure system Designed for mid and high temperature applications Excellent chemical resistance Continuous operating temperature of 275 °C Excellent long term high temperature compression set Conforms to USP VI FDA compliant Typical Applications Dyneon PFE Black Compound finished products like PFE 7502BZ can be used in applications such as mechanical seals, valves, pumps, reactors, mixers and rubber-metal bonding parts, among others.&&

About

The new Dyneon Perfluoroelastomer compound PFE 7502BZ provides an unusual combination of very broad chemical resistance and excellent physical properties at continuous high service temperatures up to 275°C. It is ideally suited for applications in the chemical processing industry as it provides long-term reliable sealing in the most extreme environments. PFE 7502BZ is compliant to the relevant FDA standards. Please contact us for more details. Special Features 75 Shore A black compound Proprietary gum / cure system Designed for mid and high temperature applications Excellent chemical resistance Continuous operating temperature of 275 °C Excellent long term high temperature compression set Conforms to USP VI FDA compliant Typical Applications Dyneon PFE Black Compound finished products like PFE 7502BZ can be used in applications such as mechanical seals, valves, pumps, reactors, mixers and rubber-metal bonding parts, among others.&&

Product Description
Generic	PFE
Material Status	Commercial: Active
Features	High Heat Resistance,Solvent resistance
Availabilitys	North America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	2.02	g/cm³	Internal Method

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	76		ASTM D2240

elastic body	Nominal value	Unit	Test method
tensile strength	15.8	MPa	DIN 53504
100% strain	11.6	MPa	DIN 53504
Tensile strain
fracture	130	%	DIN 53504
Compression deformation			ASTM D395B
200℃，70 hr	15	%	ASTM D395B
275℃，70 hr	40	%	ASTM D395B

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.