3M™ Dyneon™ PTFE Compound 1174 N

About
3M™ Dyneon™ PTFE Compound 1174 N is a non-free-flowing suspension PTFE compound containing 15% glass fibre and 5% molybdenum disulfide for compression moulding. Special Features Increased thermal dimensional stability Increased surface hardness Improved deformation under load Reduced friction and wear Low moulding pressure High limiting oxygen index (LOI) Low friction behaviour Improved mechanical properties Exceptional temperature resistance Good chemical stability&&

About

3M™ Dyneon™ PTFE Compound 1174 N is a non-free-flowing suspension PTFE compound containing 15% glass fibre and 5% molybdenum disulfide for compression moulding. Special Features Increased thermal dimensional stability Increased surface hardness Improved deformation under load Reduced friction and wear Low moulding pressure High limiting oxygen index (LOI) Low friction behaviour Improved mechanical properties Exceptional temperature resistance Good chemical stability&&

Product Description
Generic	PTFE
Material Status	Commercial: Active
Features	Low coefficient of friction,Lubricating
Availabilitys	North America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	2.26	g/cm³	ASTM D4745-06
Apparent density	0.53	g/cm³	ASTM D4894
Shrinkage rate
MD	2.1	%	ASTM D4894-07

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	66		DIN 53505
tensile strength	25.5	MPa	ASTM D4745-06
Tensile strain
fracture	290	%	ASTM D4745-06

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.