| About |
|---|
| Dyneon™ TF 2025 Z PTFE is an ideal grade for pipe liner applications in chemical plant construction due to high green strength. Product Features: High molecular weight Fine powder grade for low to medium reduction ratio High stretch ratio Processable by standard paste extrusion methods Can be used for unsintered thread sealing tape, joint sealing and pipe lining, yarns and thick wall tubing Meets ASTM D4895-04 Type 1, Grade 1, Class B classification&& |
| Product Description | |
|---|---|
| Generic | PTFE |
| Material Status | Commercial: Active |
| Features | Good Electrical Properties,Low coefficient of friction,Flame Characteristics,High molecular weight,Good Tensile Strength |
| Availabilitys | North America,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 2.15 | g/cm³ | ISO 12086 |
| Apparent density | 0.48 | g/cm³ | ISO 60 |
| Average particle size | 500 | µm | ISO 13320 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 34.0 | MPa | ISO 527-3 |
| Tensile strain | |||
| fracture | 370 | % | ISO 527-3 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Extrusion pressure | |||
| Reduction Ratio 400 | 40.0 | MPa | ASTM D4895 |
| Reduction Ratio | 20.0:1.0 to 300.0:1.0 | Internal Method |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |