| About |
|---|
| Features and Benefits Bimodal particle size distribution Low settling tendency Excellent film-forming properties Low porosity High gloss Greater hardness&& |
| Product Description | |
|---|---|
| Generic | PTFE |
| Material Status | Commercial: Active |
| Features | Good surface appearance,Good Hardness |
| Availabilitys | North America,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.50 | g/cm³ | ISO 12086 |
| Emulsifier Content | 5.0 | % | ISO 12086 |
| PH value | > 9.5 | ISO 976 | |
| Average particle size | 210 | nm | ISO 13321 |
| viscosity | 0.012 | Pa·s | DIN 54453 |
| Uncured Properties | Nominal value | Unit | Test method |
|---|---|---|---|
| Solid content | 58 | % | ISO 12086 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |