3SP™ E-Denstone Peach

About
EnvisionTEC’s E-Denstone 3SP™ Material was developed for model manufacturing. The peach color provides an attractive choice for modeling that is similar in look and feel to common die stones used in dental labs. It can be used with traditional dental manufacturing methods or as a CAD based model solution for any MCAD application. The low viscosity formula combined with high accuracy EnvisionTEC 3SP™ printers helps to produce superior results with no loss of detail. E-Denstone 3SP™is also tough enough to check form and fit without any loss of fit or causing excessive wear on the contact surfaces. The cleanup does not use messy oils or heat that can cause distortion and takes only minutes. The biggest advantage is its fast build time, even running with 35 micron resolution in Z. This means fast turnaround of highly detailed accurate models. Applications Dental, MCAD Recommended Machines: ULTRA® 3SP™, ULTRA® 3SP™ HD, 3-Dent®, ULTRA® 3SP™ Ortho&&

About

EnvisionTEC’s E-Denstone 3SP™ Material was developed for model manufacturing. The peach color provides an attractive choice for modeling that is similar in look and feel to common die stones used in dental labs. It can be used with traditional dental manufacturing methods or as a CAD based model solution for any MCAD application. The low viscosity formula combined with high accuracy EnvisionTEC 3SP™ printers helps to produce superior results with no loss of detail. E-Denstone 3SP™is also tough enough to check form and fit without any loss of fit or causing excessive wear on the contact surfaces. The cleanup does not use messy oils or heat that can cause distortion and takes only minutes. The biggest advantage is its fast build time, even running with 35 micron resolution in Z. This means fast turnaround of highly detailed accurate models. Applications Dental, MCAD Recommended Machines: ULTRA® 3SP™, ULTRA® 3SP™ HD, 3-Dent®, ULTRA® 3SP™ Ortho&&

Product Description
Generic	3D打印材料
Material Status	Commercial: Active
Features	Good surface appearance,Low Viscosity
Availabilitys	North America,Europe

Technical Data
MECHANICAL	Nominal value	Unit	Test method
tensile strength	56.0	MPa
Tensile strain
fracture	3.5	%
Bending modulus	3350	MPa
bending strength	115	MPa

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature	140	℃

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.