| About |
|---|
| 通用，透明，包装容器，塑料容器，家用电器，小家电，风叶专用料，注塑。 |
| Product Description | |
|---|---|
| Supplier | LG Chemical |
| Generic | SAN |
| Material Status | Commercial: Active |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Tensile strain | |||
| 5 mm/min | 8 | % | ASTM D638 |
| Bending modulus | |||
| 15 mm/min | 3698.37 | MPa | ASTM D790 |
| tensile strength | |||
| 5 mm/min | 72 | MPa | ASTM D638 |
| bending strength | |||
| 15 mm/min | 131.454 | MPa | ASTM D790 |
| Rockwell hardness | 124 | R 级 | ASTM D-256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa | 98 | ℃ | ASTM D648 |
| Flame retardant level | |||
| 1.50 mm | HB | UL 94 | |
| Vicat Softening Temp | |||
| A50 | 107 | ℃ | ASTM D1525 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 6.4mm | 11.76 | ASTM D256 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shrinkage rate | 0.2-0.6 | % | ASTM D955 |
| Melt Flow Rate | |||
| 220℃，10.0kg | 2.6 | g/10min | ASTM D1238 |
| Density | 1.07 | ASTM D792 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |