| About |
|---|
| ENGAGE™7256 是一种乙烯丁烯共聚物，熔流率高、密度低，可单独使用，也可与其他弹性体一同使用，应用于定制的聚合物改性。 主要特性： 粒料 密度低 加入了滑石粉 (未处理, 1µm) 应用领域： 聚合物改性 共混 符合以下政府/业界标准： 美国食品 FCN 368 欧盟指令2002-72-EC&& |
| Product Description | |
|---|---|
| Supplier | DOW |
| Generic | Polyolefin Elastomer |
| Material Status | Commercial: Active |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.885 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 2.5 | g/10min | ASTM D1238 |
| Mooney viscosity | |||
| ML 1+4，121℃ | 13 | MU | ASTM D1646 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tear strength | 24.8 | kN/m | ASTM D624 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass transition temperature | -53.0 | ℃ | Internal Method |
| Melting temperature | |||
| DSC | 76 | ℃ | Internal Method |
| Crystallization peak temperature | |||
| DSC | -42 | ℃ | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 1 second, molded | 84 | ASTM D2240 | |
| Shore D, 1 second, molded | 30 | ASTM D2240 | |
| tensile strength | |||
| Fracture, molded | 9.3 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, molded | 600 | % | ASTM D638 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |