PA66 EPR2701 - SOLIAO

About
注塑级。加入了特殊添加剂的有光中等粘度产品。主要用于注塑，有较好的流动性。

Product Description
Generic	PA66
Material Status	Commercial: Active
Features	Moderate liquidity,Medium Viscosity
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Relative viscosity	2.60±0.03		GB/T 12006.1
water content	1600±300	ppm	GB/T 12006.2

MECHANICAL	Nominal value	Unit	Test method
tensile strength	80	MPa	ISO 527
Tensile strain	30	%	ISO 527
Bending modulus	2600	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Impact strength of simply supported beam (23 ° C)
Gap	3.0	kJ/m²	ISO 179
No gap	NB	kJ/m²	ISO 179

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa	70	℃	ISO 75
melting point	260	°C	ISO 11357

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level
0.80 mm	V-2		UL 94

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.