| About |
|---|
| Grivory® G 21 is a Polyamide 6I/6T Copolymer (Nylon 6I/6T) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for blow molding, blown film, cast film, extrusion, film extrusion, injection molding, or injection stretch blow molding. Important attributes of Grivory® G 21 are: RoHS Compliant Food Contact Acceptable Typical applications include: Film Coating Applications Food Contact Applications Medical/Healthcare Packaging&& |
| Product Description | |
|---|---|
| Supplier | EMS-GRIVORY |
| Generic | PA 6I/6T |
| Material Status | Commercial: Active |
| Features | Aromatic,Food contact compliance,Block resin |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.18 | g/cm³ | ISO 1183 |
| Melt Volume Rate | |||
| 275℃，5 kg | 25.0 | cm³/10min | ISO 1133 |
| Water absorption rate | ISO 62 | ||
| Saturation, 23 ℃ | 7.0 | % | ISO 62 |
| Equilibrium, 23 ℃, 50% RH | 2.0 | % | ISO 62 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 3000 | MPa | ISO 527-2 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ISO 527-3 | ||
| MD, yield | 85.0 | MPa | ISO 527-3 |
| TD, yield | 85.0 | MPa | ISO 527-3 |
| Tensile strain | ISO 527-3 | ||
| MD, yield | 5.0 | % | ISO 527-3 |
| TD, yield | 5.0 | % | ISO 527-3 |
| MD, fracture | 300 | % | ISO 527-3 |
| TD, fracture | 300 | % | ISO 527-3 |
| Elmandorf tear strength | ISO 6383-2 | ||
| MD | 10 | N | ISO 6383-2 |
| TD | 10 | N | ISO 6383-2 |
| Pant tear resistance | ISO 6383-1 | ||
| MD | 5.00 | N/mm | ISO 6383-1 |
| TD | 5.00 | N/mm | ISO 6383-1 |
| Water vapor transmittance | |||
| 23℃，85% RH | 7.0 | g/m²/24 hr | DIS 15106-1/-2 |
| Oxygen transfer rate | DIS 15105-1/-2 | ||
| 23℃ | 30 | cm³/m²/bar/24 hr | DIS 15105-1/-2 |
| 23℃ | 10 | cm³/m²/bar/24 hr | DIS 15105-1/-2 |
| Carbon dioxide transfer rate | DIS 15105-1/-2 | ||
| 23℃ | 90.0 | cm³/m²/bar/24 hr | DIS 15105-1/-2 |
| 23℃ | 40.0 | cm³/m²/bar/24 hr | DIS 15105-1/-2 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30℃ | 8.0 | kJ/m² | ISO 179/1eA |
| 23℃ | 8.0 | kJ/m² | ISO 179/1eA |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass transition temperature | 125 | ℃ | ISO 11357-2 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 0% RH |
| 3. 85% RH |
| 4. 10°C/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |