SEETEC PP MH7900

About
聚丙烯SEETEC MH7900 ，专为生产基于聚丙烯的复合材料而设计，特别为汽车零件的成型而设计，在基体聚合物，它必须具有非常低含量的挥发性有机化合物。聚丙烯中挥发性化合物的独特低含量给产品提供了MN7900优良的感官特性(外观，感觉，气味)。由齐格勒-纳塔催化剂生产的茂金属聚丙烯MH7900中挥发性化合物的含量约为聚丙烯的15倍。

About

聚丙烯SEETEC MH7900 ，专为生产基于聚丙烯的复合材料而设计，特别为汽车零件的成型而设计，在基体聚合物，它必须具有非常低含量的挥发性有机化合物。聚丙烯中挥发性化合物的独特低含量给产品提供了MN7900优良的感官特性(外观，感觉，气味)。由齐格勒-纳塔催化剂生产的茂金属聚丙烯MH7900中挥发性化合物的含量约为聚丙烯的15倍。

Product Description
Supplier	LG Chemical
Generic	PP copolymer
Material Status	Commercial: Active
Features	Low odor
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Melt Flow Rate
230℃，2.16kg	150	g/10min	ASTM D1238
Density	0.9	g/cm³	ASTM D1505
Melting temperature	150	℃	DSC

MECHANICAL	Nominal value	Unit	Test method
Tensile strain
Fracture, 50 mm/min	> 50	%	ASTM D638
tensile strength
50 mm/min	37	MPa	ASTM D638
Bending modulus
28 mm/min	1700	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Izod notched impact strength
23℃	2	kJ/m²	ASTM D256

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.