| About |
|---|
| 增强薄膜 |
| Product Description | |
|---|---|
| Generic | HDPE |
| Material Status | Commercial: Active |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.04 | g/10min | ISO 1133 |
| Density | 0.952 | g/cm³ | ISO 1183 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Yield stress | 250 | Kg/cm2 | ASTM D-638 |
| Fracture stress | 390 | Kg/cm2 | ASTM D-638 |
| Tensile strain | |||
| fracture | 500 | % | ASTM D638 |
| Resistance to environmental stress cracking | 600 | hr | ASTM D-1693 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| melting point | 131 | ℃ | ASTM D-2117 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Izod notched impact strength | 30 | kg-cm/cm | ASTM D256 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |