| About |
|---|
| Silplus 60 EX is a heat cured silicone rubber base compound that is an excellent candidate to consider for use in extrusion, press-molding injection and calendaring. Silplus 60 EX heat cured silicone may be considered for use in a wide variety of high quality applications such as high durometer tubes and profiles. Key Features and Benefits excellent extruding processability good mechanical properties high green strength easily blendable versatile Potential Applications Because of its outstanding properties, Silplus 60 EX heat cured silicone is an excellent candidate to consider for use in most types of extrusion and calendaring applications.&& |
| Product Description | |
|---|---|
| Supplier | Momentive |
| Generic | 硅橡胶,HTV |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good Green Strength,Baking,HB |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Mooney viscosity | |||
| 25℃ | 51 | MU | DIN 53523 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 62 | DIN 53505 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 11.0 | MPa | DIN 53504 |
| Tensile strain | |||
| fracture | 500 | % | DIN 53504 |
| tear strength | 25.0 | kN/m | ASTM D624 |
| Compression deformation | |||
| 175℃，22 hr | 45 | % | ISO 815 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | HB | UL 94 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Post curing time | |||
| 200℃ | 6.0 | hr |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Vulcanization（120℃） | 10.0 | min |
| Uncured Properties | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 1.19 | g/cm³ | DIN 51757 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Die B |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |