| About |
|---|
| KYDEX® 510 is a weatherable sheet with superior performance for thermoforming and a decorative sheet for lamination. It is available in many distinctive colors and textures. An acrylic cap protects the surface, providing excellent weatherability for outdoor use. This product is now available with decorative film (black/white granite). While excellent in thermoforming, KYDEX® 510 is also being used as damage resistant surface material.&& |
| Product Description | |
|---|---|
| Supplier | Sekisui |
| Generic | PMMA+PVC |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Excellent Processability,Good flexibility,High impact resistance,Flame Characteristics,Self-extinguishing,Low moisture absorption,V-0 |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.35 | g/cm³ | ASTM D792 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃，3.2mm | 800 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, annealed, 3.18 mm | 75.6 | ℃ | ASTM D648 |
| Linear coefficient of thermal expansion | |||
| MD | 6.9E-5 | 1/℃ | ASTM D696 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Dielectric constant | |||
| 100 Hz | 2.76 | ||
| 800 Hz | 2.53 | ||
| 1.9 GHz | 2.51 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | UL 94 | ||
| 3.20 mm | V-0 | UL 94 | |
| > 1.00 mm | 5V | UL 94 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Forming temperature | 163 to 200 | ℃ |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-grade, 3.18 mm | 94 | ASTM D785 | |
| tensile strength | |||
| 3.18 mm | 42.0 | MPa | ASTM D638 |
| Bending modulus | |||
| 3.18 mm | 2480 | MPa | ASTM D790 |
| bending strength | |||
| 3.18 mm | 66.0 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |