| About |
|---|
| INNATE™ ST50 Precision Packaging Resin is designed for exceptional abuse performance. It offers a unique combination of high stiffness with excellent toughness which enables excellent performance on automated packaging equipment. This product also delivers robust processability. Complies with: Europe Commission Regulation (EU) No 10/2011 U.S. FDA FCN 424 Consult the regulations for complete details&& |
| Product Description | |
|---|---|
| Supplier | DOW |
| Generic | PE |
| Material Status | Commercial: Active |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.918 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.85 | g/10min | ASTM D1238 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 51 | µm | |
| Membrane puncture strength | 9.15 | J | |
| Membrane puncture force | 105 | N | |
| Membrane puncture resistance | 22.5 | J/cm³ | |
| Secant modulus | |||
| 2% secant, MD | 196 | MPa | |
| 2% secant, TD | 230 | MPa | |
| tensile strength | |||
| MD, yield | 10.1 | MPa | |
| TD, yield | 10.8 | MPa | |
| MD, fracture | 51.7 | MPa | |
| TD, fracture | 50.6 | MPa | |
| Tensile strain | |||
| MD, fracture | 570 | % | |
| TD, fracture | 660 | % | |
| Drop hammer impact | 1900 | g | ASTM D1709 |
| Elmandorf tear strength | |||
| MD | 570 | g | |
| TD | 940 | g |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 45° | 51 | ASTM D2457 | |
| Haze | 15 | % | ASTM D1003 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Method A |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |