| About |
|---|
| Ethylene-propylene-diene rubber (EPDM), with ethylidene norborene (ENB) as diene; amorphous; very low viscosity, designed for injection molding applications where low temperature performance is required.&& |
| Product Description | |
|---|---|
| Supplier | LANXESS |
| Generic | EPDM+SEBS |
| Material Status | Commercial: Active |
| Features | Low Viscosity,Amorphous |
| Availabilitys | North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.858 | g/cm³ | ASTM D792 |
| Mooney viscosity | |||
| ML 1+8，100℃ | 29 to 41 | MU | ASTM D1646 |
| Ethylene composition | 55.0 to 63.0 | wt% | ASTM D3900 |
| Ethylidene norbornene content | 3.4 to 4.6 | wt% | ASTM D6047 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |