Genius 251 - SOLIAO

About
Selenis Genius 251 copolyester has been specifically developed for extrusion blow moulding process of bottles of any shape. Selenis Genius 251 offers exceptional clarity, neutral colour and high gloss, granting enhanced shelf appeal whilst protecting product ingredients. Selenis Genius 251 grade offers excellent impact resistance; therefore it is recommended for the production of bottles with a volume up to 1000-ml. Selenis Genius 251 grade may be easily processed on standard extrusion blow moulding machines, provided appropriate drying equipment is used. Selenis Genius 251 offers good chemical resistance to most common additives used in the cosmetics and personal care industries; it is up to the end user to determine the fitness for use.&&

About

Selenis Genius 251 copolyester has been specifically developed for extrusion blow moulding process of bottles of any shape. Selenis Genius 251 offers exceptional clarity, neutral colour and high gloss, granting enhanced shelf appeal whilst protecting product ingredients. Selenis Genius 251 grade offers excellent impact resistance; therefore it is recommended for the production of bottles with a volume up to 1000-ml. Selenis Genius 251 grade may be easily processed on standard extrusion blow moulding machines, provided appropriate drying equipment is used. Selenis Genius 251 offers good chemical resistance to most common additives used in the cosmetics and personal care industries; it is up to the end user to determine the fitness for use.&&

Product Description
Generic	PETG
Material Status	Commercial: Active
Features	Excellent Processability,Good Clarity,Good surface appearance,High impact resistance,Renewable resources,Food contact compliance,Solvent resistance
Availabilitys	North America,Latin America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.27	g/cm³	ASTM D792
Apparent density	0.73	g/cm³
Intrinsic viscosity	0.76 to 0.80	dl/g	ISO 1628-5
Color b	< 3.00		ASTM D6290
Color L	> 64.0		ASTM D6290
Particle Shape	Cylindrical
Particle size	300 to 400	mg/20 chips
humidity	< 0.30	%

THERMAL	Nominal value	Unit	Test method
Glass transition temperature	85.0	℃	ASTM D3418

Process Conditions
Extrusion	Nominal value	Unit	Test method
Drying temperature	65	°C
Drying time	5.0 to 6.0	hr
Recommended maximum moisture content	4.0E-3	%
Melt temperature	180 to 250	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.