| About |
|---|
| Pebax® 3533 SN 01是一种聚醚嵌段酰胺（PEBA-醚）产品,。 它可以通过压延、吹塑成型、型材挤出成型、挤出、树脂传递成型、注射成型、浇铸、涂层、热成型、片材挤出成型或薄膜挤出进行加工,在亚太地区、北美洲、拉丁美洲、欧洲或非洲和中东有供货。 特性包括: 耐冲击 耐热 良好的抗紫外线能力&& |
| Product Description | |
|---|---|
| Supplier | Arkema |
| Generic | PA12弹性体 |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,High impact resistance,High Heat Resistance,Electroplating,HB |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.01 | g/cm³ | ISO 1183-2 |
| Melt Volume Rate | |||
| 235℃，1 kg | 12.0 | cm³/10min | ISO 1133 |
| Water absorption rate | |||
| saturated | 1.2 | % | ISO 62-2 |
| balance | 0.50 | % | ISO 62-2 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 19.0 | MPa | ISO 527-2 2 |
| tensile strength | |||
| 50% strain | 4.00 | MPa | ISO 527-2 2 |
| Tensile strain | |||
| fracture | > 50 | % | ISO 527-2 2 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | — | ISO 179/1eA 2 | |
| -30℃ | — | ISO 179/1eA 2 | |
| Charpy impact strength | |||
| 23℃ | — | ISO 179/1eU 2 | |
| -30℃ | — | ISO 179/1eU 2 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa | 46.0 | ℃ | ISO 75-2 2 |
| Melting temperature | 144 | ℃ | ISO 11357-3 2 |
| Linear coefficient of thermal expansion | |||
| MD | 2.1E-4 | 1/℃ | ISO 11359-2 2 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | — | ohms | IEC 60093 2 |
| Volume resistivity | 3.2E+12 | ohms·cm | IEC 60093 2 |
| Dielectric strength | 34 | kV/mm | IEC 60243-1 2 |
| Relative permittivity | |||
| 100 Hz | 6.00 | IEC 60250 2 | |
| 1 MHz | 6.00 | IEC 60250 2 | |
| Dissipation factor | |||
| 100 Hz | 0.031 | IEC 60250 2 | |
| 1 MHz | 0.043 | IEC 60250 2 | |
| Compared to the leakage tracing index | |||
| CTI | — | IEC 60112 2 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 1.60 mm | HB | ISO 1210 2 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |