| About |
|---|
| PCL = poly(e-caprolactone) Materials available: B6015-1: Inherent Viscosity – 0.70 to 0.90 IV This product is soluble in dicholormethane, cholorform, and hexafluoroisopropanol.&& |
| Product Description | |
|---|---|
| Supplier | DuPont |
| Generic | PCL |
| Material Status | Commercial: Active |
| Features | Renewable resources,Biodegradable |
| Availabilitys | Africa & Middle East ,North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.15 | g/cm³ | |
| Viscosity number | 70.0 to 90.0 | cm³/g | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 345 to 1380 | MPa | |
| tensile strength | 7.58 | MPa | |
| Tensile strain | |||
| fracture | 600 | % |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass transition temperature | -50.0 to -40.0 | ℃ |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Crystalline Melt Transition | Amorphous |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |