| About |
|---|
| Unfilled PBT+PC alloy. Outstanding low temperature impact/chemical resistance. UV stabilized version of XENOY&& |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | PC+PBT |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Solvent resistance,low-temperature impact resistance |
| Availabilitys | North America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.17 | g/cm³ | ASTM D792 |
| Specific volume | 0.850 | cm³/g | ASTM D792 |
| Density | 1.17 | g/cm³ | ISO 1183 |
| Melt Flow Rate | ASTM D1238 | ||
| 250℃，2.16kg | 3.8 | g/10min | ASTM D1238 |
| 250℃，5.0kg | 11 | g/10min | ASTM D1238 |
| 265℃，2.16kg | 6.8 | g/10min | ASTM D1238 |
| 266℃，5.0kg | 20 | g/10min | ASTM D1238 |
| Melt Flow Rate | ISO 1133 | ||
| 250℃，2.16kg | 3.8 | g/10min | ISO 1133 |
| 250℃，5.0kg | 11 | g/10min | ISO 1133 |
| Melt Volume Rate | ISO 1133 | ||
| 250℃，2.16 kg | 3.60 | cm³/10min | ISO 1133 |
| 250℃，5 kg | 10.9 | cm³/10min | ISO 1133 |
| 265℃，2.16 kg | 6.50 | cm³/10min | ISO 1133 |
| 265℃，5 kg | 18.9 | cm³/10min | ISO 1133 |
| Shrinkage rate | |||
| MD：3.2 mm | 1.0 to 1.2 | % | Internal Method |
| Water absorption rate | |||
| Saturation, 23 ℃ | 0.28 | % | ISO 62 |
| Equilibrium, 23 ℃, 50% RH | 0.080 | % | ISO 62 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| — | 1830 | MPa | ASTM D638 |
| — | 1830 | MPa | Internal Method |
| — | 1820 | MPa | ASTM D638 |
| Tensile modulus | 1800 | MPa | ISO 527-1-2 |
| tensile strength | |||
| yield | 44.0 | MPa | ASTM D638 |
| yield | 45.0 | MPa | Internal Method |
| yield | 47.0 | MPa | ASTM D638 |
| tensile strength | |||
| yield | 44.0 | MPa | ISO 527-2/5 |
| yield | 47.0 | MPa | ISO 527-2/50 |
| tensile strength | |||
| fracture | 50.0 | MPa | ASTM D638 |
| fracture | 47.0 | MPa | Internal Method |
| fracture | 48.0 | MPa | ASTM D638 |
| tensile strength | |||
| fracture | 43.0 | MPa | ISO 527-2/5 |
| fracture | 43.0 | MPa | ISO 527-2/50 |
| Tensile strain | |||
| yield | 4.6 | % | ASTM D638 |
| yield | 4.6 | % | Internal Method |
| yield | 4.0 | % | ASTM D638 |
| Tensile strain | |||
| yield | 4.1 | % | ISO 527-2/5 |
| yield | 4.6 | % | ISO 527-2/50 |
| Tensile strain | |||
| fracture | 120 | % | ASTM D638 |
| fracture | 110 | % | Internal Method |
| fracture | 120 | % | ASTM D638 |
| Tensile strain | |||
| fracture | 110 | % | ISO 527-2/5 |
| fracture | 120 | % | ISO 527-2/50 |
| Bending modulus | 1870 | MPa | ISO 178 |
| 50 mm span | 1660 | MPa | ASTM D790 |
| bending strength | 71.0 | MPa | ISO 178 |
| bending strength | |||
| Fracture, 50 mm span | 69.0 | MPa | ASTM D790 |
| Yield, 50 mm span | 70.0 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30℃ | 48 | kJ/m² | ISO 179/1eA |
| 23℃ | 56 | kJ/m² | ISO 179/1eA |
| Impact strength of cantilever beam notch | ASTM D256 | ||
| -40℃ | 600 | J/m | ASTM D256 |
| -30℃ | 650 | J/m | ASTM D256 |
| -20℃ | 700 | J/m | ASTM D256 |
| -10℃ | 660 | J/m | ASTM D256 |
| 0℃ | 690 | J/m | ASTM D256 |
| 23℃ | 720 | J/m | ASTM D256 |
| Impact strength of cantilever beam notch | ISO 180/1A | ||
| -40℃ | 46 | kJ/m² | ISO 180-1A |
| -30℃ | 48 | kJ/m² | ISO 180-1A |
| -20℃ | 50 | kJ/m² | ISO 180-1A |
| -10℃ | 52 | kJ/m² | ISO 180-1A |
| 0℃ | 55 | kJ/m² | ISO 180-1A |
| 23℃ | 56 | kJ/m² | ISO 180-1A |
| Dart impact equipped with measuring instruments | ASTM D3763 | ||
| -40℃，Energy at Peak Load | 49.5 | J | ASTM D3763 |
| -40℃，Total Energy | 59.2 | J | ASTM D3763 |
| -30℃，Energy at Peak Load | 49.5 | J | ASTM D3763 |
| -30℃，Total Energy | 61.9 | J | ASTM D3763 |
| -20℃，Energy at Peak Load | 41.9 | J | ASTM D3763 |
| -20℃，Total Energy | 53.2 | J | ASTM D3763 |
| 23℃，Energy at Peak Load | 44.8 | J | ASTM D3763 |
| 23℃，Total Energy | 54.0 | J | ASTM D3763 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | ASTM D648 | ||
| 0.45 MPa, unannealed, 3.2 mm | 108 | ℃ | ASTM D648 |
| 0.45 MPa, unannealed, 6.4 mm | 117 | ℃ | ASTM D648 |
| Hot deformation temperature | ASTM D648 | ||
| 1.8 MPa, unannealed, 64 mm span | 87.0 | ℃ | ISO 75-2/Af |
| 0.45 MPa, unannealed, 64 mm span | 110 | ℃ | ISO 75-2/Bf |
| 1.8 MPa, unannealed, 3.2 mm | 83.5 | ℃ | ASTM D648 |
| 1.8 MPa, unannealed, 6.4 mm | 95.9 | ℃ | ASTM D648 |
| Vicat Softening Temp | 120 | ℃ | ASTM D1525 14 |
| Vicat Softening Temp | |||
| B50 | 120 | ℃ | ISO 306 |
| B120 | 122 | ℃ | ISO 306/B120 |
| Linear coefficient of thermal expansion | |||
| TD：-40~95℃ | 1.0E-4 | 1/℃ | ASTM E831 |
| TD：-30~80℃ | 1.0E-4 | 1/℃ | ISO 11359-2 |
| MD：-40~95℃ | 9.8E-5 | 1/℃ | ASTM E831 |
| MD：-30~80℃ | 9.8E-5 | 1/℃ | ISO 11359-2 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 110 | °C | |
| Drying time | 4.0 to 6.0 | hr | |
| Drying time, maximum | 8.0 | hr | |
| Recommended maximum moisture content | 0.020 | % | |
| Recommended injection volume | 50 to 80 | % | |
| Barrel rear temperature | 243 to 266 | °C | |
| Barrel middle temperature | 249 to 271 | °C | |
| Barrel front temperature | 254 to 277 | °C | |
| Nozzle temperature | 254 to 271 | °C | |
| Processing (melt) temperature | 260 to 277 | °C | |
| Mold temperature | 66 to 88 | °C | |
| Back pressure | 0.345 to 0.689 | MPa | |
| Screw speed | 50 to 80 | rpm | |
| Vent depth | 0.013 to 0.020 | mm | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 0.20 in/min |
| 3. 0.39 in/min |
| 4. 2.0 in/min |
| 5. Type I, 2.0 in/min |
| 6. Type I, 0.39 in/min |
| 7. Type I, 0.20 in/min |
| 8. 0.051 in/min |
| 9. 0.079 in/min |
| 10. Yield |
| 11. 80*10*4 sp=62mm |
| 12. 80*10*4 |
| 13. 80*10*4 mm |
| 14. Rate B (120°C/h), Loading 2 (50 N) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |