VESTOLIT® P 1351 K

About
VESTOLIT P 1351 K is a paste forming hompolymer which produces Newtonian pastes with low viscosity and good shelf life. P 1351 K can be formulated into pastes with a low plasticiser content, primarily into chemical foams, but also in solid coatings.&&

Product Description
Generic	PVC homopolymer
Material Status	Commercial: Active
Features	Low Viscosity,Foaming performance,Homopolymer
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Apparent density	0.30	g/cm³	ISO 60
K-Value	69.0		ISO 1628-2
Viscosity value
Reduced viscosity	120.0	ml/g	ISO 1628
PH value	6.0		ISO 1060-2
Particle size distribution	< 1.0	%	ISO 1624
water content	< 0.30	%	DIN 53715
Viscosity – Paste
—	3.50	Pa·s
—	3.50	Pa·s

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.