| About |
|---|
| Nofia® HM1100 has an exceptionally high limiting oxygen index, which makes it particularly well suited to be used as an FR additive. This material is a transparent high flowing polymer with a glass transition temperature of about 105°C. A range of molecular weights can be produced.&& |
| Product Description | |
|---|---|
| Generic | PPh |
| Material Status | Commercial: Active |
| Features | Good Rigidity,High liquidity,Halogen free,Flame Characteristics,Homopolymer |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Volume Rate | |||
| 210℃，2.16 kg | 5.00 to 9.00 | cm³/10min | |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass transition temperature | 103 to 107 | ℃ |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Extreme oxygen index | 65 | % |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Transmittance | > 88.0 | % |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature – hot air dryer | 80 | °C | |
| Drying time – hot air dryer | 6.0 | hr | |
| Recommended maximum moisture content | 0.020 | % | |
| Notes |
|---|
| 1. Phosphorus |
| 2. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |