| About |
|---|
| Polyvinylidene Fluoride (PVDF) is ideal for multiple applications across a wide array of industries. Widely used in the chemical processing industry, wire and cable industry, semiconductor industry, and oil and gas industry, PVDF is also gaining recognition in automotive, building, electronics, pharmaceutical and battery applications. 3M™ Dyneon™ PVDF 6010/0000 is an extrusion or compression molding grade homopolymer, ideal for pipes, tubes, sheets, and slabs. PVDF is inherently pure and chemically resistant to a wide array of aggressive media. This grade exhibits excellent thermal and dimensional stability, high strength, and maintains its mechanical properties at elevated temperatures. Features and Benefits Excellent chemical resistance to wide variety of aggressive fluids and solvents Good permeation resistance Excellent strength and dimensional stability Extrusion or compression molding grade Good color stability&& |
| Product Description | |
|---|---|
| Generic | PVDF |
| Material Status | Commercial: Active |
| Features | Good Rigidity,High purity,Good Dimensional Stability,Good color stability,Solvent resistance,Heat Stabilized,V-0 |
| Availabilitys | North America,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.78 | g/cm³ | ISO 1183 |
| Melt Flow Rate | ASTM D1238 | ||
| 230℃，2.16kg | 2.0 | g/10min | ASTM D1238 |
| 230℃，5.0kg | 6.0 | g/10min | ASTM D1238 |
| Water absorption rate | |||
| 23℃，24hr | < 0.040 | % | ISO 62 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ASTM D638 | ||
| Yield, 23 ℃ | 55.0 | MPa | ASTM D638 |
| Fracture, 23 ℃ | 42.0 | MPa | ASTM D638 |
| Tensile strain | ASTM D638 | ||
| Yield, 23 ℃ | 7.0 | % | ASTM D638 |
| Fracture, 23 ℃ | 35 | % | ASTM D638 |
| Bending modulus | |||
| 23℃ | 2100 | MPa | ASTM D790 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | ASTM D3418 | ||
| 0.45 MPa, annealed, 4.0 mm | 110 | ℃ | ASTM D3418 |
| 1.8 MPa, unannealed, 4.0 mm | 110 | ℃ | ASTM D3418 |
| Melting peak temperature | 173 | ℃ | ASTM D3418 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | V-0 | UL 94 | |
| Extreme oxygen index | |||
| 3.0 mm | 44 | % | ASTM D2863 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 2.0 in/min |
| 3. 0.079 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |