Teflon® PTFE 605XT X

About
DuPont ™ Teflon ® PTFE 605XT X is a polytetrafluoroethylene fine powder resin used primarily for paste extrusion. Teflon ® PTFE 605XT X offers the excellent combination of properties typical of the Teflon ® fluoropolymer resins: non-aging characteristics; chemical inertness to nearly all industrial chemicals and solvents; exceptional dielectric properties, stable with frequency and temperature; toughness and flexibility; low coefficient of friction; non-stick characteristics; negligible moisture absorption; excellent weather resistance; service temperature up to 260°C (500°F); useful properties at -240 °C (-400 °F); moderate stiffness and high ultimate elongation. Teflon ® PTFE 605XT X is designed for processing at low to medium reduction ratios of 10:1 to 300:1. It is particularly suitable for unsintered stretched products and for sintered products with high mechanical properties. Teflon ® PTFE 605XT X meets the requirements of ASTM D 4895-91a, Type I, Grade 4, Class A. Typical Applications Teflon ® PTFE 605XT X is mainly used for unsintered articles including filter membranes and gaskets. It is also used for making sintered products such pipe liners and tubes.&&

About

DuPont ™ Teflon ® PTFE 605XT X is a polytetrafluoroethylene fine powder resin used primarily for paste extrusion. Teflon ® PTFE 605XT X offers the excellent combination of properties typical of the Teflon ® fluoropolymer resins: non-aging characteristics; chemical inertness to nearly all industrial chemicals and solvents; exceptional dielectric properties, stable with frequency and temperature; toughness and flexibility; low coefficient of friction; non-stick characteristics; negligible moisture absorption; excellent weather resistance; service temperature up to 260°C (500°F); useful properties at -240 °C (-400 °F); moderate stiffness and high ultimate elongation. Teflon ® PTFE 605XT X is designed for processing at low to medium reduction ratios of 10:1 to 300:1. It is particularly suitable for unsintered stretched products and for sintered products with high mechanical properties. Teflon ® PTFE 605XT X meets the requirements of ASTM D 4895-91a, Type I, Grade 4, Class A. Typical Applications Teflon ® PTFE 605XT X is mainly used for unsintered articles including filter membranes and gaskets. It is also used for making sintered products such pipe liners and tubes.&&

Product Description
Supplier	Chemours
Generic	PTFE
Material Status	Commercial: Active
Features	Good Rigidity,Weather resistance is good,Good flexibility,Good Electrical Properties,Low coefficient of friction,Food contact compliance,Good Tensile Strength,Solvent resistance,Low moisture absorption,High ESCR
Availabilitys	North America,Latin America,Asia Pacific,Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	2.15	g/cm³	ASTM D4895 , ISO 12086
Apparent density	0.54	g/cm³	ASTM D4895 , ISO 12086
Average particle size
—	680	µm	ASTM D4895
—	680	µm	ISO 12086

THERMAL	Nominal value	Unit	Test method
Melting temperature			ASTM D4895 , ISO 12086
—	326	℃	ASTM D4895，ISO 12086
—	344	℃	ASTM D4895，ISO 12086

Supplementary information	Nominal value	Unit	Test method
Extrusion pressure – at RR=100:1
—	7.00	MPa	ASTM D4895
—	7.00	MPa	ISO 12086

Notes
1. Typical properties: these are not to be construed as specifications.
2. Second
3. Initial
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.