Vydyne® ECO366H NT0708

About
Vydyne ECO366H NT0708 is an unfilled, PA66 homopolymer utilizing a non-halogen flame retardant, designed with superior flow properties to assist in filling thin-walled, intricate parts. It is stabilized to provide heat stability up to 170°C for 1,000 hours. ECO366H NT0708 is also lubricated for machine feed and easy mold release and has an Underwriters Laboratories UL 94 flammability classification of V-0 at 0.2mm (0.008″) thick.&&

About

Vydyne ECO366H NT0708 is an unfilled, PA66 homopolymer utilizing a non-halogen flame retardant, designed with superior flow properties to assist in filling thin-walled, intricate parts. It is stabilized to provide heat stability up to 170°C for 1,000 hours. ECO366H NT0708 is also lubricated for machine feed and easy mold release and has an Underwriters Laboratories UL 94 flammability classification of V-0 at 0.2mm (0.008″) thick.&&

Product Description
Supplier	Ascend
Generic	PA66
Material Status	Commercial: Negative
Features	Low Halogen Content,Good heat aging resistance,Good Electrical Properties,Corrosion Resistant,Good stripping performance,Flame Characteristics,Lubricating,Solvent resistance,Heat Stabilized
Availabilitys	North America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	80	°C
Drying time	4.0	hr
Proposed maximum recycled material ratio	50	%
Barrel rear temperature	260 to 290	°C
Barrel middle temperature	260 to 290	°C
Barrel front temperature	260 to 290	°C
Nozzle temperature	260 to 290	°C
Processing (melt) temperature	270 to 285	°C
Mold temperature	65 to 95	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.