EPDM 520 - SOLIAO

About
EPDM 520 brake parts, corner moldings, general-purpose gaskets, and moldings. The combination of low viscosity and low crystallinity allows for good processability, low temperature properties, and product performance without the addition of a plasticizer. Main Characteristics: Amorphous Medium diene Low molecular weight Good low temperature properties Applications: Injection and transfer molded brake parts General purpose gaskets Complies with U.S. FDA 21 CFR 177.2600 U.S. FDA 21 CFR 175.105 (Adhesives only). Consult the regulations for complete details.&&

About

EPDM 520 brake parts, corner moldings, general-purpose gaskets, and moldings. The combination of low viscosity and low crystallinity allows for good processability, low temperature properties, and product performance without the addition of a plasticizer. Main Characteristics: Amorphous Medium diene Low molecular weight Good low temperature properties Applications: Injection and transfer molded brake parts General purpose gaskets Complies with U.S. FDA 21 CFR 177.2600 U.S. FDA 21 CFR 175.105 (Adhesives only). Consult the regulations for complete details.&&

Product Description
Supplier	DOW
Generic	EPDM+SEBS
Material Status	Commercial: Active
Availabilitys	North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.860	g/cm³	ASTM D297
Mooney viscosity
ML 1+4，125℃	16 to 24	MU	ASTM D1646
Ethylene composition	49.0 to 51.0	wt%	ASTM D3900
Ethylidene norbornene content	4.5 to 5.3	wt%	ASTM D6047
Propylene content	45.0	wt%	ASTM D3900
Residual conversion metal	< 10	ppm	Internal Method
molecular weight distribution	Medium		Internal Method
Ash Content	< 0.1	%	ASTM D5667
Volatiles	< 0.40	wt%	Internal Method

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.