| About |
|---|
| Transparent, Thermoplastic Polyimide (TPI) resin with a glass transition temperature (Tg) of 247C. This product has thinwall FR capability and has a UL94 V0 listing. This material is RoHS compliant and also halogen free according VDE/DIN 472 part 815. Resin is subject to U.S. Commerce Control Laws (15CFR Chapter VII, Part 774).&& |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | Polyetherimide |
| Material Status | Commercial: Active |
| Features | Halogen free,Flame Characteristics |
| Availabilitys | North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.30 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 337℃，6.60kg | 16 | g/10min | ASTM D1238 |
| Melt Volume Rate | |||
| 360℃，5 kg | 8.00 | cm³/10min | ISO 1133 |
| Shrinkage rate | |||
| MD | 0.50 to 0.70 | % | |
| MD：3.2 mm | 0.50 to 0.70 | % | |
| TD：3.2 mm | 0.50 to 0.70 | % | |
| Water absorption rate | |||
| Saturation, 23 ℃ | 1.8 | % | |
| Equilibrium, 23 ℃, 50% RH | 0.60 | % | |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Unnotch Impact strength | |||
| -30℃ | 无断裂 | ||
| 23℃ | 无断裂 | ||
| Impact strength of cantilever beam notch | |||
| -30℃ | 74 | J/m | ASTM D256 |
| 23℃ | 69 | J/m | ASTM D256 |
| -30℃ | 5.0 | kJ/m² | ISO 180-1A |
| 23℃ | 4.0 | kJ/m² | ISO 180-1A |
| Notched impact strength of cantilever beam | |||
| 23℃ | 无断裂 | ASTM D4812 | |
| -30℃ | 无断裂 | ISO 180/1U | |
| Dart impact equipped with measuring instruments | |||
| 23℃，Total Energy | 33.0 | J | ASTM D3763 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed, 6.4 mm | 237 | ℃ | ASTM D648 |
| 1.8 MPa, unannealed, 3.2 mm | 217 | ℃ | ASTM D648 |
| 1.8 MPa, unannealed, 6.4 mm | 230 | ℃ | ASTM D648 |
| 1.8 MPa, unannealed, 4.0 mm, 64 mm span | 228 | ℃ | ISO 75-2/Af |
| Vicat Softening Temp | |||
| — | 242 | ℃ | ASTM D1525 12 |
| B120 | 238 | ℃ | ISO 306/B120 |
| Ball pressure test | |||
| 123~127℃ | 通过 | IEC 60695-10-2 | |
| Linear coefficient of thermal expansion | |||
| MD：-40~150℃ | 5.0E-5 | 1/℃ | ASTM E831 |
| MD：23~150℃ | 5.0E-5 | 1/℃ | ISO 11359-2 |
| TD：-40~150℃ | 5.0E-5 | 1/℃ | ASTM E831 |
| TD：23~150℃ | 5.0E-5 | 1/℃ | ISO 11359-2 |
| Thermal conductivity coefficient | 0.22 | W/m/K | ASTM E1530 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Dielectric strength | |||
| 3.2 mm in oil | 17 | kV/mm | ASTM D149 |
| Dielectric constant | |||
| 100 Hz | 3.41 | ||
| 1 kHz | 3.41 | ||
| Dissipation factor | |||
| 50 Hz | 0.025 | ||
| 60 Hz | 0.025 | ||
| 100 Hz | 8.0E-3 | ||
| 1 kHz | 1.0E-3 | ||
| 1 MHz | 7.0E-3 | ||
| Compared to the leakage tracing index | 175 | V | IEC 60112 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Glowing wire flammability index | |||
| 3.2 mm | 960 | ℃ | IEC 60695-2-12 |
| Igniting temperature of the hot wire | |||
| 3 mm | 850 | ℃ | IEC 60695-2-13 |
| Extreme oxygen index | 45 | % | ISO 4589-2 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Transmittance | |||
| 2540 µm | 58.0 | % | ASTM D1003 |
| Haze | |||
| 2540 µm | 2.0 | % | ASTM D1003 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Ball hardness | |||
| H358/30 | 140 | MPa | ISO 2039-1 |
| Tensile modulus | |||
| — | 3510 | MPa | ASTM D638 |
| — | 3110 | MPa | ISO 527-1-2 |
| tensile strength | |||
| yield | 96.0 | MPa | ASTM D638 |
| yield | 95.0 | MPa | ISO 527-2/5 |
| fracture | 96.0 | MPa | ASTM D638 |
| fracture | 78.0 | MPa | ISO 527-2/5 |
| Tensile strain | |||
| yield | 6.0 | % | ASTM D638 |
| yield | 8.5 | % | ISO 527-2/5 |
| fracture | 50 | % | ASTM D638 |
| fracture | 17 | % | ISO 527-2/5 |
| Bending modulus | |||
| 50 mm span | 3170 | MPa | ASTM D790 |
| — | 3080 | MPa | ISO 178 |
| bending strength | |||
| — | 123 | MPa | ISO 178 |
| Yield, 100 mm span | 155 | MPa | ASTM D790 |
| Fracture, 50 mm span | 159 | MPa | ASTM D790 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 150 | °C | |
| Drying time | 4.0 to 6.0 | hr | |
| Recommended maximum moisture content | 0.020 | % | |
| Recommended injection volume | 40 to 60 | % | |
| Barrel rear temperature | 360 to 380 | °C | |
| Barrel middle temperature | 370 to 395 | °C | |
| Barrel front temperature | 380 to 405 | °C | |
| Nozzle temperature | 375 to 400 | °C | |
| Processing (melt) temperature | 380 to 405 | °C | |
| Mold temperature | 135 to 165 | °C | |
| Back pressure | 0.300 to 0.700 | MPa | |
| Screw speed | 40 to 70 | rpm | |
| Vent depth | 0.025 to 0.076 | mm | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Tensile Bar |
| 3. 0.20 in/min |
| 4. Type I, 0.20 in/min |
| 5. 0.051 in/min |
| 6. 0.079 in/min |
| 7. at Yield |
| 8. 0.10 in/min |
| 9. 80*10*4 sp=62mm |
| 10. 80*10*4 mm |
| 11. Rate A (50°C/h), Loading 2 (50 N) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |