KYDEX® T MB - SOLIAO

About
Microban® technology KYDEX® T MB is a proprietary thermoplastic sheet that is cost competitive with fire retardant ABS/PVC (FR-ABS) formulations but with significantly higher impact strength and extensibility. Microban® protection is built-in to continuously fight the growth of microbes. Since KYDEX® T MB is less hygroscopic, unlike FR-ABS, is typically does not require pre-drying, offers superior impact, more uniform forming with less wall thinning and offers significantly greater resistance to a broad range of corrosive chemicals and cleaning solutions. It is available in a wide range of aesthetic choices and is Underwriter’s Laboratories, Inc® recognized Std 94 V-0, 5V.&&

About

Microban® technology KYDEX® T MB is a proprietary thermoplastic sheet that is cost competitive with fire retardant ABS/PVC (FR-ABS) formulations but with significantly higher impact strength and extensibility. Microban® protection is built-in to continuously fight the growth of microbes. Since KYDEX® T MB is less hygroscopic, unlike FR-ABS, is typically does not require pre-drying, offers superior impact, more uniform forming with less wall thinning and offers significantly greater resistance to a broad range of corrosive chemicals and cleaning solutions. It is available in a wide range of aesthetic choices and is Underwriter’s Laboratories, Inc® recognized Std 94 V-0, 5V.&&

Product Description
Supplier	Sekisui
Generic	PMMA+PVC
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,High impact resistance,Clean,Antimicrobial properties,Flame Characteristics,Solvent resistance,V-0
Availabilitys	North America,Latin America,Asia Pacific,Europe
Process Methods	Thermo forming

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.35	g/cm³	ASTM D792

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃，3.2mm	800	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, annealed, 3.18 mm	75.6	℃	ASTM D648

FLAME CHARACTERISTICS	Nominal value	Test method
Flame retardant level		UL 94
3.20 mm	V-0	UL 94
0.71 mm	5V	UL 94

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-grade, 3.18 mm	94		ASTM D785
tensile strength
Yield, 3.18 mm	42.0	MPa	ASTM D638
Tensile strain
Fracture, 3.18 mm	110	%	ASTM D638
Bending modulus
3.18 mm	2480	MPa	ASTM D790
bending strength
Yield, 3.18 mm	66.0	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.