| About |
|---|
| Medium viscosity, easy-flowing polyamide 1012 resin VESTAMID®Terra DD-G16 is an unmodified, easy-flowing, tough-improved PA 1012 resin for injection molding or modification by a compounding process. Due to its semi-crystalline morphology VESTAMID®Terra DD-G16 provides an excellent chemical resistance, e.g., against greases, oils, fuels and hydraulic fluids. VESTAMID® Terra is a group of new polyamides, the monomers for which are based entirely or partly on renewable raw materials. VESTAMID® Terra DD-G16 is a development product of the VESTAMID® Terra DD product range. VESTAMID® Terra DD is the polycondensation product of 1,10-decamethylene diamine (D) and 1,12-dodecanedioic acid (D). Because both monomers are extracted from plant oils, VESTAMID® Terra DD is a material that is based 100% on natural resources.&& |
| Product Description | |
|---|---|
| Supplier | Evonik |
| Generic | PA 1012 |
| Material Status | Commercial: Active |
| Features | Renewable resources,Good liquidity,Hypocrystalline,Solvent resistance |
| Availabilitys | North America,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.03 | g/cm³ | ISO 1183 |
| Water absorption rate | |||
| Saturation, 23 ℃ | 1.6 | % | ISO 62 |
| Viscosity number | 160 | cm³/g | ISO 307 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| 23℃ | 1300 | MPa | ISO 527-2 |
| tensile strength | |||
| yield | 40.0 | MPa | ISO 527-2 |
| Tensile strain | ISO 527-2 | ||
| yield | 5.0 | % | ISO 527-2 |
| fracture | > 50 | % | ISO 527-2 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30 ℃, completely fractured | 16 | kJ/m² | ISO 179/1eA |
| 23 ℃, completely fractured | 12 | kJ/m² | ISO 179/1eA |
| Charpy Unnotch Impact strength | ISO 179/1eU | ||
| -30℃ | 无断裂 | ISO 179/1eU | |
| 23℃ | 无断裂 | ISO 179/1eU |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | |||
| — | 188 | ℃ | ISO 306/A |
| — | 168 | ℃ | ISO 306/B |
| Melting temperature | 190 | ℃ | ISO 11357 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Renewable Carbon Conent | 100 | % | ASTM D6866 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 2nd heating |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |