XIRAN® IZ0721M

About
XIRAN® IZ0721M is an amorphous thermoplastic random styrene maleic anhydride N-Phenylmaleimide (SMANPMI) terpolymer. XIRAN® IZ0721M is typically added to other engineering plastics to increase: thermal stability dimensional stability Application areas XIRAN® IZ0721M is specifically designed as an additive to increase the thermal properties of several engineering plastics especially in styrenic like ABS&&

About

XIRAN® IZ0721M is an amorphous thermoplastic random styrene maleic anhydride N-Phenylmaleimide (SMANPMI) terpolymer. XIRAN® IZ0721M is typically added to other engineering plastics to increase: thermal stability dimensional stability Application areas XIRAN® IZ0721M is specifically designed as an additive to increase the thermal properties of several engineering plastics especially in styrenic like ABS&&

Product Description
Generic	Styrene-maleic anhydride copolymer
Material Status	Commercial: Active
Features	Good Dimensional Stability,Heat Stabilized,Amorphous
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Apparent density	0.60	g/cm³	Internal Method
Melt Flow Rate
265℃，10.0kg	70	g/10min	ISO 1133
Maleic anhydride content
Calculated	7.0	%	Internal Method
Molecular Weight（Calculated）	135000	g/mol	Internal Method

THERMAL	Nominal value	Unit	Test method
Glass transition temperature	178	℃	ISO 3146
thermal stability	380	℃	TGA

Process Conditions
injection	Nominal value	Unit	Test method
Extrusion	Nominal value	Unit	Test method
Drying temperature	80 to 90	°C
Drying time	2.0 to 3.0	hr
Barrel rear temperature	230 to 250	°C
Barrel middle temperature	230 to 250	°C
Barrel front temperature	230 to 250	°C
Nozzle temperature	240 to 270	°C
Processing (melt) temperature	< 280	°C
Drying temperature	80 to 90	°C
Drying time	2.0 to 3.0	hr
Barrel 1 zone temperature	230 to 250	°C
Barrel 2 zone temperature	230 to 250	°C
Barrel 3 zone temperature	230 to 250	°C
Barrel 4 zone temperature	230 to 250	°C
Barrel 5 zone temperature	230 to 250	°C
Nozzle temperature	240 to 270	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.