TAFMER™ BL3110M

About
TAFMER™ BL3110M, 1-butene based polymer, is a specialty olefinic resin designed to control easy peel strength of Polyethylene (PE) based film.&&

Product Description
Supplier	Mitsui
Generic	PAO
Material Status	Commercial: Negative
Features	Butylene copolymer
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Melt Flow Rate			ASTM D1238
190℃，2.16kg	1.0	g/10min	ASTM D1238
230℃，2.16kg	3.0	g/10min	ASTM D1238

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	-30.0	℃	ASTM D746
Melting temperature	110	℃	Internal Method

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	60		ASTM D2240
Tensile modulus	280	MPa	ASTM D638
tensile strength
fracture	51.0	MPa	ASTM D638
Tensile strain
fracture	420	%	ASTM D638

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.